ADAM Audio’s New Subwoofer Puts Sonarworks Room Correction Inside the Box
Room correction is nothing new in professional audio, but ADAM Audio has taken an interesting approach with its latest studio subwoofer. The new Sub10 PRO can store Sonarworks SoundID Reference calibration filters directly in its onboard DSP, allowing users to apply room correction without relying on a separate plugin running in their DAW. For anyone building a carefully calibrated monitoring system, that is one of the most interesting things about this new 10-inch subwoofer.
Introduced alongside the smaller Sub8 PRO, the Sub10 PRO joins ADAM Audio’s professional subwoofer range with built-in DSP, Ethernet-based control and connectivity for both analog and digital audio systems. Rather than functioning simply as an extra bass driver beneath a pair of studio monitors, it is designed to become part of a more flexible stereo, multichannel or immersive monitoring setup.
A 10-inch driver with DSP-based room correction
At the heart of the Sub10 PRO is a high-excursion 10-inch woofer featuring a fibre-reinforced paper cone and rubber surround. ADAM Audio has paired it with a Class D amplifier delivering 200 watts RMS, while a front-firing bass reflex port has been optimized using finite element analysis to help reduce airflow turbulence.
The published frequency response extends from 21 Hz to 300 Hz at -6 dB, giving the subwoofer the low-frequency reach needed for monitoring demanding material. Its maximum sound pressure level is rated at 106 dB SPL under the manufacturer’s specified measurement conditions.
ADAM Audio’s New Subwoofer Hits 21 Hz and Can Correct for Your Room
However, the DSP functionality is arguably the bigger story. Through ADAM Control software, users can adjust equalization, gain, phase and delay over an Ethernet connection. The system also offers four-band parametric EQ for tailoring the subwoofer’s response to the listening environment and matching it with the main monitors.
The particularly interesting addition is Sonarworks SoundID Reference integration. Calibration filters created using SoundID Reference can be imported directly into the Sub10 PRO’s onboard DSP. This means the correction can be handled inside the hardware instead of depending on a separate DAW plugin remaining active during playback.
Three operating modes for different studio systems
ADAM Audio has given the Sub10 PRO three operating modes to make it suitable for different monitoring arrangements.
Stereo mode is intended for conventional two-channel studio systems, allowing the subwoofer to work alongside a pair of monitors. LFE mode is designed for low-frequency effects channels in multichannel and immersive audio environments, while Wide mode allows the subwoofer to operate across its full available frequency range.
There is also a choice of four crossover frequencies: 70, 85, 100 and 115 Hz. Combined with phase, level and delay adjustments of up to 10 milliseconds, these controls provide flexibility when integrating the subwoofer with different monitors and room layouts.
Professional connections and network control
The rear panel offers balanced XLR/TRS combination inputs and XLR analog outputs, alongside AES3 digital input and output connections. The digital interfaces support audio up to 24-bit/96 kHz, making the Sub10 PRO suitable for integration into professional digital monitoring environments.
An Ethernet connection provides access to ADAM Control, where users can manage calibration settings and make adjustments remotely. There is also a dedicated footswitch connection for bypass operation, which can be useful when comparing monitoring configurations.
Argon Audios new berlin subwoofers promise deep bass without the usual subwoofer delay
The cabinet is constructed from MDF, with a front-firing bass reflex port and a protective metal grille over the driver. Measuring 450 x 360 x 450 mm, the subwoofer weighs 22.8 kg, so it is a substantial piece of studio equipment despite its relatively compact 10-inch driver.
ADAM Audio Sub10 PRO price and availability
The ADAM Audio Sub10 PRO is priced at $1,499.99 in the United States. It sits above the smaller Sub8 PRO in the company’s new PRO subwoofer range, which is priced at $1,199.99.
For studio owners, the appeal is not simply the addition of another subwoofer with deeper bass extension. The combination of onboard DSP, network-based adjustments and Sonarworks SoundID Reference integration makes the Sub10 PRO an interesting option for anyone who wants room calibration to become part of the monitoring hardware itself.
